Â
Calcium carbonate ultra-fine grinding mill is a new type of grinding mill specially used to grind non-metallic minerals to 325-2500 mesh ultra-fine powder. This ultra-fine grinding mill has the performance advantages of high fineness of finished products, high processing efficiency, low investment and low loss of parts.
Â
Â
Â
Calcium carbonate ultra-fine grinding mill is suitable for grinding materials which are non-flammable and non-explosive, such as dolomite, calcium carbonate, kaolin, bentonite, talc, mica, barite, gypsum and graphite and so on. The final product has been widely applied in paint, paper making, pigment, rubber, plastic, padding, cosmetic, chemical supplies and many other industrial fields.
Â
Â
Material |
Fineness (Mesh) |
Application |
Calcium carbonate |
600 |
Coating, paper making toothpaste, healing drugs and daily chemical using, pvc making, etc. |
800 |
Paint, coating, paper making toothpaste, healing drugs and daily chemical using, pvc making, etc. |
|
1250 |
Paint, coating, paper making, toothpaste, healing drugs and daily chemical using. additive in chemical and plastic high quality paper and seal oil as additive, etc. |
|
1500 |
Paint, coating, paper making, toothpaste, healing drugs and daily chemical using. additive in chemical and plastic high quality paper and seal oil as additive, etc. |
|
Barite |
600 |
Paint, rubber packing. drilling mud, pvc making, plastic, etc. |
800 |
Paint, rubber packing. drilling mud, plastic, etc. |
|
1250 |
Paint, rubber packing,paper making, drilling mud, plastic, etc. |
|
2500 |
Paint, rubber packing, paper making, drilling mud, plastic, etc. |
|
Calcite |
600 |
Paper making, coating, printing ink, main ingredients of toothpaste, etc |
800 |
Paper making, coating, printing ink, pvc additives, cable additives, etc |
|
1250 |
Degradable plastic, paper making. paint, coating, printing ink, adhesive,etc |
|
2500 |
Degradable plastic, coating, printing ink, adhesive, etc |
|
Mica |
600 |
Pearl pigment, toothpaste, coating, paint, etc |
800 |
Pearl pigment, mica paper coating, paint, etc |
|
1250 |
Oil drilling mica pulp, pearl pigment, paper making, coating, paint, plastic, cosmetics, etc |
|
2500 |
Oil drilling mica pulp, pearl pigment, paper making, coating, paint, plastic, cosmetics, aerial material, etc |
Â
Â
The raw material will be fed into the hammer crusher or a jaw crusher to be crushed first. The crushed material smaller than 20mm will be sent to the hopper by the bucket elevator and then be fed into the main mill through a belt feeder.
Â
The motor of the main mill drives the center shaft and disc rotor to rotate through the reducer. Here we have 2 configurations of drive mode for your option, you can choose reducer drive or belt drive. The roller pins on the edge of the grinding disc drive the grinding rollers to roll in the mill roller path. The material will fall on the distribution plate above the disc rotor, moving sideward under the action of centrifugal force, and then falling into the mill roller path for being crushed and grinded between the rings and rollers. After being processed through roller paths, the material will become ultra-fine powder. The high-pressure blower will inhale outside air into the mill body, then taking the grinded material into the powder classifier.
Â
The rotating impeller in the classifier drives the coarse particles to fall into the pulverizer for re-grinding. The fine powder that meets the size requirements enters the cyclone powder collector along with the airflow, and is discharged from the lower discharge valve as a finished product. At the same time, a small amount of fine dust is released from the The airflow is brought to the pulse dust collector. The blower provides air flow to the entire mill system and creates a negative pressure. Soundproof rooms and silencers help reduce noise pollution.
Â
Â
Content |
Model |
||||
MSF600 |
MSF800 |
MSF1000 |
MSF1250 |
MSF1680 |
|
Roller qty. |
12Â pcs |
21 Â pcs |
28Â pcs |
32pcs |
44pcs |
Diameter of ring |
Φ600 mm |
Φ800 mm |
Φ1000mm |
Φ1250mm |
Φ1680 |
Main unit speed |
250-280rpm |
230-240rpm |
180-200rpm |
135-155rpm |
120-130rpm |
Max. feeding size |
20mm |
10mm |
20Â mm |
20mm |
25mm |
Final size |
325-2500mesh |
325-2500mesh |
325~2500Â mesh |
325~2000Â mesh |
325~1500Â mesh |
Capacity |
0.2~3tph |
0.5~4.5tph |
1~8.5tph |
2.5-14tph |
5~25tph |
Dimension |
11.5×3.5×5.2m |
13×3×5.8m |
18×4.6×8.6m |
14×9×10.25m |
16×5×11m |
Main unit |
45KW |
75KW/2×37KW |
132KW |
185KW |
280/315KW |
Classifier |
15KW |
18.5KW |
30KW |
4×15KW |
5×18.5 |
Blower |
37KW |
45KW |
75KW |
110KW |
2×90KW |
Hammer crusher |
PC300×400 |
PC400×600 |
PC400×600 |
PC600×800 |
PC600×800 |
PC600×800 |
|||||
PC400×600 |
|||||
11KW/18.5KW |
18.5KW |
18.5KW/45KW |
45KW |
45KW |
|
Bucket elevator |
TH200×8.2m |
TH200×9.79m |
TH300×11.05m |
TH300×13.55m |
TH300*16.31m |
3KW |
3KW |
4KW |
5.5KW |
7.5KW |
|
Belt feeder |
300×60×1M |
300×60×1.8M |
300×60×1.8M |
400×80×2M |
400×80×2.8M |
1.1KW |
1.5KW |
1.5KW |
1.5KW |
2.2KW |
|
Dust collector |
DMC96 |
DMC120/160 |
LDMC250 |
LDMC450 |
2×LDMC400 |
Air compressor |
LG3.2/8 |
KSH150D |
KSH300D |
LG6.2/8 |
LG10/8 |
11KW |
11KW |
22KW |
37KW |
55KW |
Â
Â
Â
http://www.mrcrushermill.com/